Post by robriley on Aug 28, 2011 12:39:20 GMT -6
Altered wheel base plymouth gtx. This is the kit that t.d. did the box art for. I cut the rear 1/4 panels off, moved them forward and then modified everything else to fit the new wheel base.
kit supplied hemi with parts box blower, wheels, tires and front axle.
This was done before i started doing plug wires and fuel lines.
The paint is candy orange over a silver base with yellow panels.
This was a stock 55 chevy kit when i started. again, I cut the rear 1/4 panels off and moved them forward, modifying everything else to fit the new wheel base.
shaved the side trim off the body and added blue tinted windows.
Headers from the beer wagon, engine, wheels, tires, and seat from my parts box. I made an "aluminum" cover, to hide the back seat area. Paint is transparent blue over a silver base.
this started out as a stock 66 mercury cyclone and i did the same thing to this that i did to the others to alter the wheel base. The engine is a boss 429, beer wagon injection stacks, parts box front axle, wheels and tires.
The paint is candy orange over a gold base.
This was a hubley 1962 ford country squire dealer promo.
Parts box wheels, tires, front axle, blower and headers (there's no engine because the hood is molded closed). Windows were made out of clear sheet plastic. Roof light made from some peices that were in my parts box. Look at the decal on the moon tank...old otis is hiding his hooch in there!
the paint is your basic black & white.
This is a follow up to the 62 ford wagon. Good old barney has moved up to the big time with this fuel flopper.
Built box stock out of a cop out kit. the paint is gloss white over silver. you have to look close at the third pic. look at the decals on the fuel tanks. This is where otis is now hiding his hooch.
This was built out of the re-issue "pro street mustang" formerly the "flip out" which was originally the malco gasser kit.
I narrowed the rear axle slightly and put on skinnier slicks to bring the rear tires into the wheel wells better.
other than that, the wheels, tires and the decals, it's built box stock.
This was a tamiya fiat abarth 500. It now has the hemi from a cop out stuffed in the drivers compartment with parts box zoomies. The driver has been moved back to the center where the rear seat was. He sits in a funny car seat with scratch built "tins" and a modified funny car cage.
The paint is competition orange.
This was a partial kit when i got it, so i had to replace some of the missing parts with goodies from my parts box. If i remember right, I added parts box hemi, wheels and tires, headers, blower and injector.
The snake and mongoose. both kits built box stock. Paint on the snake is krylon sun yellow over silver, Paint on the mongoose is krylon pepper red over silver.
kit supplied hemi with parts box blower, wheels, tires and front axle.
This was done before i started doing plug wires and fuel lines.
The paint is candy orange over a silver base with yellow panels.
This was a stock 55 chevy kit when i started. again, I cut the rear 1/4 panels off and moved them forward, modifying everything else to fit the new wheel base.
shaved the side trim off the body and added blue tinted windows.
Headers from the beer wagon, engine, wheels, tires, and seat from my parts box. I made an "aluminum" cover, to hide the back seat area. Paint is transparent blue over a silver base.
this started out as a stock 66 mercury cyclone and i did the same thing to this that i did to the others to alter the wheel base. The engine is a boss 429, beer wagon injection stacks, parts box front axle, wheels and tires.
The paint is candy orange over a gold base.
This was a hubley 1962 ford country squire dealer promo.
Parts box wheels, tires, front axle, blower and headers (there's no engine because the hood is molded closed). Windows were made out of clear sheet plastic. Roof light made from some peices that were in my parts box. Look at the decal on the moon tank...old otis is hiding his hooch in there!
the paint is your basic black & white.
This is a follow up to the 62 ford wagon. Good old barney has moved up to the big time with this fuel flopper.
Built box stock out of a cop out kit. the paint is gloss white over silver. you have to look close at the third pic. look at the decals on the fuel tanks. This is where otis is now hiding his hooch.
This was built out of the re-issue "pro street mustang" formerly the "flip out" which was originally the malco gasser kit.
I narrowed the rear axle slightly and put on skinnier slicks to bring the rear tires into the wheel wells better.
other than that, the wheels, tires and the decals, it's built box stock.
This was a tamiya fiat abarth 500. It now has the hemi from a cop out stuffed in the drivers compartment with parts box zoomies. The driver has been moved back to the center where the rear seat was. He sits in a funny car seat with scratch built "tins" and a modified funny car cage.
The paint is competition orange.
This was a partial kit when i got it, so i had to replace some of the missing parts with goodies from my parts box. If i remember right, I added parts box hemi, wheels and tires, headers, blower and injector.
The snake and mongoose. both kits built box stock. Paint on the snake is krylon sun yellow over silver, Paint on the mongoose is krylon pepper red over silver.