|
Post by petec210 on Nov 2, 2021 8:29:00 GMT -6
|
|
|
Post by Dr. Kerry on Nov 2, 2021 11:19:19 GMT -6
That is rough for sure... Skim coats of body filler lightly spread over it, sand and repeat until it's smoothed out. I've seen some rough resin before but wow...
|
|
|
Post by flounder on Nov 2, 2021 22:32:04 GMT -6
Sanding blocks and files. Your need a hard backing so you can shape it. Sanding sticks and fingers will only make it worse. Good luck.
|
|
|
Post by bugaboo on Nov 3, 2021 2:02:03 GMT -6
Remember resin dust is VERY bad, so wear a respirator, and be sure to clean off all resin dust. And wow, that has got to be one of the worst resin castings I have ever seen.... If I paid for that, I would return it....
|
|
|
Post by Starry Eyes on Nov 3, 2021 17:46:43 GMT -6
First off soak the body in warm soapy water or bleach white for 5-6 hours .. next rinse with clean warm water and set aside to COMPLETELY dry 24-48 hours .. a timely progress but I have brushed on super glue to fill and smooth superficial pinholes .. then sand with a supported sanding pad or stick .. do not use anything soft ,flexible, or spongy .. you want to keep you shape .. I also use 2 sometime 3 different colors of primer .. to expose flaws , high and low spots .. I have one of these bodies as well so I know what you’re facing .. just my 2 cents
|
|
|
Post by petec210 on Nov 4, 2021 2:46:04 GMT -6
Thank you everyone
|
|
|
Post by Paul B. Canney on Nov 8, 2021 12:04:12 GMT -6
First off soak the body in warm soapy water or bleach white for 5-6 hours .. next rinse with clean warm water and set aside to COMPLETELY dry 24-48 hours .. a timely progress but I have brushed on super glue to fill and smooth superficial pinholes .. then sand with a supported sanding pad or stick .. do not use anything soft ,flexible, or spongy .. you want to keep you shape .. I also use 2 sometime 3 different colors of primer .. to expose flaws , high and low spots .. I have one of these bodies as well so I know what you’re facing .. just my 2 cents 100% agreement!
|
|